HP CORSE HYDROFORM INOX SATIN cod. Exhaust slip-on Hydroform homologated direttiva 97/24/CE-2006/120/CE cap. 9 low + link pipe for original collector + db killer racing 35mm - TRIUMPH SPEED TRIPLE 2007 - 2010.
Sound charm and power to a higher level. HYDROFORM is the name of the new line of HP CORSE exhausts. A terminal to go beyond every rule, where only the imagination could have pushed.
Hydroforming is an extremely refined technology, which consists in the deformation of pipes through a high pressure water jet which allows the shaping of the tubes inside a forming mold. Thanks to this, a shaped pipe is also obtained in the curves, avoiding welds that could change the internal volume of the exhaust pipe, thus also facilitating the flow of exhaust gases along the duct. The result is a light exhaust thanks to the reduced thickness of the plate, but at the same time rigid and strong. The slip-on of the HYDROFORM line are born to equip the naked and the most beautiful sports in production. Hp CORSE, company based in Bologna begins its partnership with STEELFORM Udine company for the production of motorcycle terminals.
In 2009 the HYDROFORM project comes to life, on design and development by the laboratories HP CORSE and metal processing by STEELFORM company specialized in processing and deformation of metals. HP CORSE it will remain the nerve center in the design of each component, STEELFORM's task will be to translate project work into terminals, exhaust slip-on and special link pipe, perfect in design and style, totally made in Italy.
From July 2015 the 2 companies have expanded the product range with EVOXTREME and HYDROTRE (Totally designed for MV AGUSTA). HP racing and STEELFORM now follow in the footsteps of a great worldwide success which promises to become a model of absolute development in the world of entirely crafted special exhausts created in Italy. Enclosure: special stainless steel with variable thickness 0.5 / 0.8 mm. Surface finishes: satin and black ceramic.Sound-absorbing material with high sound absorption capacity. Removable DBK with additional sound absorption chamber. 1 increased on request diameter 35 not approved for use in closed circuit. 2 increased on request diameter 40 not approved for use in closed circuit. Stainless steel rivets in watertight.
Logo engraved with the laser beam. Weight 990 gr (without DBK and fitting). In 1994, the Passion and Experience of Fabrizio Bertollini created OMNIA RACING , with the aim of representing a reference point for everyone fond of bikes. In 2000, when Salvatore Orefice joins OMNIA RACING , the OMNIA RACING Special Parts project is founded, a society based on the passion and competence needed to create and trade the top products for motorbikes.
Our continuous search for perfection and performance, using advanced technologies, has allowed OMNIA RACING Special Parts to interact with internationally famous pilots and teams. Our products are excellent for both road and circuit use. They are constantly tested by our technicians and pilots, thus improving the techicnal, dynamical and structurale features of the materials adopted and of the special parts produced. The experience gained through the years has permitted Omnia Racing Special Parts to be extremely selective in the choice of the firms and of the products distributed.Accostato, Afam, Aim, Akrapovic, Andreani, Arrow, Bazzaz, BC battery controller, Bitubo, BMC, Braking, Brembo, BST, Capit, Castrol, Derry Moto, Diapason, DID, Discacciati, Eibach, EK, Fabbri, Far, FrenTubo, Galfer, GBRacing, Giannelli, Gifrap, Givi, Gopro Hero, GPT, H2O, Hagon, Ixil, JollyMoto, Kappa, Laser, LCR selle, Leovince, Lightech, Mafra, Marchesini, Marvic, Marzocchi, Matris, Mivv, MRA, Nissin, Ohlins, PBR, Polini, PT, Rizoma, RME, Robby Moto, Sachs, STM, Stomp, SuperB, Suter, Termignoni, Valtermoto. OMNIA RACING Special Parts is in close contact with its customers, taking part to several important events: Bike Expò Padova, national and international races, free circuit sessions.
On the web, our "on-line shop window" is always associated with a direct contact with the customers, so as to suggest them the product that best suits their needs. This should allow our customers to feel at ease and to trust us.
All this has allowed us to become, in less than a decade, a reference point in Italy; in addition, our products are increasingly demanded also in Europe and in the US. L'item "HPCORSE Pot D'Echappement HYDROFORM satin approuvé TRIUMPH SPEED TRIPLE 072010" est en vente depuis le mardi 27 mars 2018. Il est dans la catégorie "Auto, moto - pièces, accessoires\Moto\ pièces détachées\Systèmes d'échappement\Silencieux, déflecteurs". Le vendeur est "omnia-racing" et est localisé à/en IT. Cet article peut être livré partout dans le monde.